Most ARs leave the factory with a gritty heavy mil-spec trigger. That trigger can cost you speed and accuracy.

The RISE Blitz G2 Slide-and-Snap AR Trigger changes that in about a minute.

It delivers a single-stage pull with no take-up before the break. You get a crisp break and short tactile reset. As a result you get a fast hard-hitting accurate trigger. It helps tighten groups and speed up follow-up shots.

Install in About a Minute

Installation takes just a few simple steps.

The anti-walk and anti-rotation pins come built into the housing. Therefore you avoid loose parts and extra tools. Simply squeeze the pins and slide the Blitz G2 into your lower. The pins then seat themselves. Next snap on the blade face and you’re ready to go. Most installations take less than a minute. You often won’t need to remove the grip or safety selector.

Choose Your Blade Face

The Blitz G2 offers flat and curved blade faces. Choose black RISE Red or silver. The flat blade face features a wide profile and smooth rounded edges. A subtle index at the bottom helps keep your finger positioned consistently.

Meanwhile the curved blade face provides a broad stable platform. It delivers a comfortable and controlled pull. The curved option works especially well with gloves or larger hands. If you’ve used an RA-434 HPT the flat blade face will feel familiar. The curved blade face takes its design cues from the original Blitz G1.

Swap Faces in Seconds

The blade face connects to the blade base through patent-pending TorLok technology. TorLok combines a mechanical lock with magnetic reinforcement for a secure connection. It stays firmly attached through hard use. However you can swap blade faces in seconds without tools. Every RISE Interchangeable Blade Face fits the Blitz G2. Therefore you can change your setup without buying another trigger.

Built for Hard Use

The RISE Blitz G2 Slide-and-Snap AR Trigger suits rifles that see serious use. Run it in the carbine you train with. Keep it in the truck gun behind the seat. Use it on your .300 BLK build or the AR you take hunting.

Heavy-Hit hardened S7 tool steel internals deliver consistent performance through thousands of rounds. The durable black nitride finish helps protect against corrosion and wear. RISE machines the housing from a solid block of 6061 aluminum. Unlike stamped sheet steel it resists bending and torque. The result is a rugged trigger built to perform when you need it.

It’s made in Broken Arrow Oklahoma and backed by Rise's Lifetime Warranty and the RISE More-Bang-for-Your-Buck Performance Guarantee.

• Crisp break no take-up — With NoWay Take-Up trigger movement begins right at the sear. There’s no slack to pull through so the pull is short and predictable shot after shot and your groups tighten.
• A reset you can feel and hear — The Quik-Klik reset is short tactile and audible. The trigger’s ready again after a fraction of the travel so your follow-up shots come faster.
• In and running in under a minute — The Slide-and-Snap install slides into your lower and locks in place with anti-walk and anti-rotation pins built into the housing. No tools no setscrews no loose hardware and often no need to remove the grip or safety selector.
• Flat or curved your call — Comes with your choice of blade face flat or curved in black RISE Red or silver. The flat blade face has a subtle index at the bottom that keeps your finger in the same spot every shot. (It’s inspired by the RA-434 HPT’s blade.) The curved blade face gives your finger a broad stable platform.
• Locked on swaps in seconds — Patent-pending TorLok technology secures the blade face with a mechanical lock and a magnet so it stays put. When you want a different feel or color you can change it out in seconds with no tools. Every RISE Interchangeable Blade Face fits.
• Built to run hard — Heavy-Hit hardened S7 tool steel a durable black nitride finish and a housing machined from a solid block of 6061 aluminum. Backed by Rise's Lifetime Warranty and the RISE More-Bang-for-Your-Buck Performance Guarantee.

Additional Features

• Heavy-Hit Hardening — After machining the S7 tool steel internals are heat-treated to extreme hardness. That means solid hammer strikes and parts that resist wear over thousands of rounds.
• Black Nitride Finish — A diffusion process that hardens the surface of the steel internals and resists wear and corrosion so the trigger keeps its feel and cleans up easily.
• 6061 Aluminum Housing — Machined from a solid block of 6061 aluminum rather than stamped and bent from sheet steel. Lighter stronger and it won’t bend or torque under hard use.
• Made in Broken Arrow Oklahoma — Designed precision-machined to aerospace tolerances and assembled in the USA and individually inspected before it ships.
• Lifetime Warranty and Performance Guarantee — Backed by the RISE Lifetime Manufacturing Warranty and the More-Bang-for-Your-Buck Performance Guarantee. If it doesn’t deliver no take-up a crisp break and a fast tactile reset we’ll buy it back.

Key Features:

• Trigger Type: Single-stage
• Pull Weight: 3.5 lb.
• Platform Compatibility: ARs with mil-spec lower receiver dimensions (AR-15 AR-10 and AR9) PCC compatible. Calibers include 5.56/.223 .300 BLK 9mm 6.5 .308 and more
• Installation: Slide-and-Snap with built-in anti-walk / anti-rotation pins
• Blade Shape: Interchangeable flat or curved blade face (your choice)
• Housing: Precision-machined 6061 aluminum silver anodized
• Internal Components: S7 tool steel Heavy-Hit hardened black nitride finish
• Other Features: Compatible with all RISE blade faces; TorLok blade retention
• Standard Configurations: Flat or curved blade face in black RISE Red or silver; black blade base; silver housing
• Country of Origin: Made in the USA (Broken Arrow Oklahoma)
• Warranty: RISE Lifetime Manufacturing Warranty + RISE More-Bang-for-Your-Buck Performance Guarantee

Included Accessories

• Built-in anti-walk / anti-rotation pins